Dip-Switch Settings; Dip - Black - r.LiNK RL4-UCON8-CP Manual

1.4.

Dip-switch settings

1.4.1. 8 dip - black

Some settings have to be selected by the dip-switches on the
video interface.
Dip position down is ON and position up is OFF.
Dip Function
1 Front camera
Power supply
output
(red wire)
2 CVBS AV1-input
3 CVBS AV2-input
4 No function
5 Rear-view cam type
6
No function
7
No function
8 Monitor size
*The front camera will automatically be switched for 10 seconds after disengaging the
reverse gear.
See the following chapters for detailed information.
Version 24.09.2019
ON (down)
enabled*
+12V (max. 3A) when reverse gear
is engaged incl. 10 seconds delay
and +12V by manual switching to
front camera by keypad
enabled
enabled
after-market
8,4inch
HW CANM(V98)/(V34)
OFF (up)
disabled
+12V (max. 3A) ACC
disabled
disabled
Set to OFF
factory or none
Set to OFF
Set to OFF
RL4-UCON8-CP