Power Supply Output - r.LiNK RL4-UCON8-CP Manual

2.7.

Power supply output

The red power supply output
external source and has a different assignment depending on the position of dip switch 1 (of
the black 8 dips):
Dip Function
Dip 1 ON +12V (max. 3A) when reverse gear is engaged incl. 10 seconds
delay after reverse gear is disengaged and
+12V by manual switching to front camera by keypad (short
press)
Dip 1 OFF +12V (max. 3A) ACC
Version 24.09.2019
ACC/front cam out 12V (max 3A)
HW CANM(V98)/(V34)
can be used to power an
RL4-UCON8-CP