Warning Notes, Concerning The Installation Of Ribbon Cables; Connection - Picture Signal Cable - r.LiNK RL4-UCON8-CP Manual

2.3.1. Warning notes, concerning the installation of ribbon cables

1) The contacting ends of ribbon cables always have to be installed in a straight and precise
180° position to the connector. Each deviation from a perfect contact position will curse
faulty contact and even danger of short circuit
2) The ribbon cable's contacting side always has to correspond to the contacting side of the
connector, concerning the mounting position.
2.4. Connection – picture signal cable
Connect the opposite female 20pin connector of the pre-connected 20pin picture signal
cable to the male 20pin connector of the video interface.
Version 24.09.2019 HW CANM(V98)/(V34) RL4-UCON8-CP