Picture Settings - r.LiNK RL4-UCON8-CP Manual

1. Picture settings

The picture settings are adjustable by the 3 push-buttons of the daughjter PCB's menu
keypad. Press the 1. button to open the OSD settings menu or to switch to the next menu
item. By pressing the other both push buttons the selected value will be changed. To avoid
accidental changes during or after the installation, we recommend to disconnect the keypad
from the pushbutton cable after the adjustments are done. Adjustments have to be done,
while the selected input is visible on the monitor.
Note: The OSD menu is only shown when a working video source is connected to the
selected video-input of the interface.
The following settings are available:
Contrast
Brightness
Saturation
Position H (horizontal)
Position V (vertical)
IR-AV1/2 (no function)
Guide L/R (no function)
UI-CNTRL (no function)
Size H/V (picture size horizontal/vertical)
Note: To adjust the reverse picture settings, engage the reverse gear.
Version 24.09.2019 HW CANM(V98)/(V34) RL4-UCON8-CP