Table of Contents
Advertisement
Quick Links
r.LiNK Video inserter
CI-RL3-MIB92
Skoda vehicles with MIB2 High - Columbus infotainment and 9.2inch monitor
VW vehicles with MIB2 High - Discover Pro infotainment and 9.2inch monitor
Example:
MIB2 High
Discover Pro
Video-inserter for one rear-view camera
and two more video inputs
Product features
Video-inserter for factory-infotainment systems
CVBS Input for one rear-view camera
2 CVBS Video-inputs for after-market Video sources (e.g. DVD-Player, DVB-T Tuner)
Automatic switching to rear-view camera input on engagement of the reverse gear
Activatable parking guide lines for rear-view camera (not available for all vehicles)
Video-in-motion (ONLY for connected video-sources)
Video inputs NTSC compatible
Version 24.07.2018
HW CAM(V97)/(V30)
CI-RL3-MIB92
Advertisement
Table of Contents
Related Manuals for r.LiNK CI-RL3-MIB92
Summary of Contents for r.LiNK CI-RL3-MIB92
- Page 1 Video inserter CI-RL3-MIB92 Skoda vehicles with MIB2 High - Columbus infotainment and 9.2inch monitor VW vehicles with MIB2 High - Discover Pro infotainment and 9.2inch monitor Example: MIB2 High Discover Pro Video-inserter for one rear-view camera and two more video inputs Product features ...
-
Page 2: Table Of Contents
Case 2Interface does not receive the reverse gear signal 2.7. Connecting video-interface and external keypad 2.8. Picture settings and guide lines 3. Interface operation 3.1. By factory infotainment button 3.2. By keypad 4. Specifications 5. FAQ – Trouble Shooting-Interface functions Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 3: Prior To Installation
Due to changes in the production of the vehicle manufacturer there’s always a possibility of incompatibility. 1.1. Delivery contents Take down the serial number of the interface and store this manual for support purposes: ____________________ Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 4: Checking The Compatibility Of Vehicle And Accessories
With connecting the interface, the former factory PDC graphics won’t apply anymore. Acoustic signals will still be present. Guide lines If the video interface doesn’t receive the vehicle’s CAN-bus information, the guide-lines will not be supported. Video input signal only NTSC compatible Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 5: Boxes And Connectors - Video Interface
CVBS Video 2-input enabled disabled No function set to OFF Rear-view cam type after-market factory or none set to OFF Monitor set to OFF adjustment set to ON See the following chapters for detailed information. Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 6: Enabling The Interface's Video Inputs (Dip 2-3)
The interface needs a permanent 12V source! 2.1. Place of installation The interface is supposed to be installed at a suitable location behind the vehicle`s head- unit. Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 7: Connection Schema
2.2. Connection schema Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 8: Connection To The Factory Head Unit
(see graphic) to the male 12pin connector of the enclosed PNP harness. Clip in the female 12pin connector of the PNP harness in the previously become free position of the female Quadlock connector, before finishing the Quadlock reconnection at the rear of the head-unit. Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 9: Power - And Can Connection For The Video Interface
Connect the single, yellow wire of the 10pin power/CAN cable to +12V permanent and stabile power supply. Connect the single, black wire of the 10pin power/CAN cable to the vehicle’s negative ground. Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 10: Analog Power Supply For The Video Interface
ACC-out (max 3A) and the purple coloured wire Manual ACC of the 12pin interface cable both have to be connected additionately to S-contact terminal 86s +12V (e.g. glove compartment illumination). Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 11: Connection Of Video-Sources
12pin interface cable. Connect the video RCA of the Rear-view camera to the female RCA connector “Camera IN” of the 20pin interface cable (refer also to chapter “Video signal connection of the rear-view camera”) Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 12: Audio Insertion
“Camera IN” while the reverse gear is engaged. Additionally, the +12V (max. 3A) power supply for the rear-view camera can be taken from the green wire of the 12pin interface cable. Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... - Page 13 (86) of the relay. Connect the output connector (87) of the relay to the rear-view camera’s power- cable, like you did it to the green “Reverse-IN” cable before. Connect stabile and permanent +12V to the relay’s input connector (30). Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92...
-
Page 14: Connecting Video-Interface And External Keypad
Connect the female 4pin connector of the keypad to the male 4pin connector of the 12pin interface cable. Note: Even if switching through several video sources by the keypad mightn’t be required, the invisible connection and availability is strongly recommended. Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 15: Picture Settings And Guide Lines
PDC ON: Only PDC will be shown. information from the vehicle CAN-bus, neither Guide ON: Only guide lines will be moving guide-lines nor PDC will be supported. shown. ALL Off: Guide lines and PDC won’t be shown. Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 16: Interface Operation
Alternatively or additionally to the factory infotainment buttons, the interface’s external keypad can be used to switch the enabled inputs. Even if not needed, the keypad should always remain connected to the video interface for support purposes. Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 17: Specifications
7V - 25V Stand-by power drain Power 300mA @12V Video input 0.7V - 1V Video input formats NTSC Temperature range -40°C to +85°C Dimensions video-box 119 x 24 x 103 mm (W x H x D) Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... -
Page 18: Faq - Trouble Shooting-Interface Functions
Camera input picture fluorescent light which shines Test camera under natural light outside the garage. flickers. directly into the camera. Camera input picture is Protection sticker not Remove protection sticker from lens. bluish. removed from camera lens. Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92... - Page 19 Cut the grey wire of 6pin to 8pin and isolate both Interface switches compatibility to vehicle is ends. If problem still occurs, additionally cut the white video-sources by itself. limited. wire of 6pin to 8pin cable and isolate both ends. 10R-03 5384 Made in China Version 24.07.2018 CAM(V97)/(V30) CI-RL3-MIB92...