Interface Operation By External Keypad - r.LiNK RL4-UCON8-CP Manual

3. Interface operation by external keypad

The interface's external keypad can be used to switch the enabled inputs.
 Long press of keypad (2-3 seconds)
By long pressing the external keypad (2-3 seconds), the video interfaces witches the input
from the factory video to the inserted video sources.
Each press (approx. 2 sec) will switch to the next enabled input. If all inputs are enabled the
order is:
Factory video
Disabled inputs will be skipped.
Note: The interface switches after releasing the switch (after long pressure).
 Short press of keypad (only if DIP 1 is set to ON)
By short pressing the external keypad, the video interfaces switches from the factory video
to the front camera input and back to factory video.
Version 24.09.2019
 
video IN1 video IN2
HW CANM(V98)/(V34)
 
factory video ...
RL4-UCON8-CP