Table of Contents
Advertisement
1.3.
Boxes and connectors – video interface
The video-interface converts the video signals of connected after-market sources in a factory
monitor compatible picture signal which is inserted in the factory monitor, by using separate
trigger options. Further it reads the vehicle's digital signals out of the vehicle's CAN-bus and
converts them for the video interface.
1.4.
Settings of the 8 Dip switches (black)
Some settings have to be selected by the dip-switches on the
video interface. Dip position down is ON and position up is OFF.
Dip
Function
1
No function
2
CVBS Video 1-input
3
CVBS Video 2-input
4
No function
5
Rear-view cam type
6
Monitor
7
adjustment
8
See the following chapters for detailed information.
Version 24.07.2018
ON (down)
enabled
enabled
after-market
set to ON
CAM(V97)/(V30)
OFF (up)
set to OFF
disabled
disabled
set to OFF
factory or none
set to OFF
set to OFF
CI-RL3-MIB92
Advertisement
Table of Contents
