Table of Contents
Advertisement
1.3.
Boxes and connectors – video interface
The video-interface converts the connected after-market sources video signals into a LVDS
signal which is inserted in the factory monitor using separate trigger options. Further it reads
the vehicle's digital signals out of the vehicle's CAN-bus and converts them for the video
interface.
1.4.
Settings of the 8 Dip switches (black)
Some settings have to be selected by the dip-switches on the
video interface. Dip position down is ON and position up is OFF.
Dip
Function
1
PDC
2
CVBS Video 1-input
3
CVBS Video 2-input
4
No function
5
Rear-view cam type
6
Monitor
7
adjustment
8
See the following chapters for detailed information.
Version 07.05.2020
ON (down)
enabled
enabled
enabled
after-market
Try all 6 possible combinations of Dips 6, 7 and 8 to
receive the best picture (quality and size) or see chapter
"Monitor adjustment (Dip 6-8)"
HW: GD(V97)/(V33)
OFF (up)
disabled
disabled
disabled
set to OFF
factory or none
CI-RL3-MIB-4
Advertisement
Table of Contents
