Table of Contents
Advertisement
1.4.
Connection Video-Interface
The video-interface converts the video signals of connected after-market sources in a factory
monitor compatible picture signal which is inserted in the factory monitor, by using separate
trigger options. Further it reads the vehicle's digital signals out of the vehicle's CAN-bus and
converts them for the video interface.
1.5.
Settings of the 8 Dip switches (black)
Some settings have to be selected by the 8 dip-switches at the
video-interface. Dip position down is ON and position up is OFF.
Dip
Function
1
No function
2
CVBS AV1-input
3
CVBS AV2-input
4
No function
5
Rear-view cam type
6
No function
7
No function
Picture customizing
8
Head unit
See the following chapters for detailed information.
After each Dip-switch-change a power-reset of the Can-box has to be performed!
Version 02.02.2018
ON (down)
enabled
enabled
after-market
Try the 2 possible settings of dip 8 to find the
best picture (quality and size)
HW:CAM-GD (V94)
OFF (up)
set to OFF
disabled
disabled
set to OFF
factory or none
set to OFF
set to OFF
RL3-NAC
Advertisement
Table of Contents
