Checking The Interface Compatibility Of Vehicle And Accessories; Connectors; Connectors - Video Interface - r.LiNK RL4-UCON8-CP Manual

1.2. Checking the compatibility of vehicle and accessories
Requirements
Brand Compatible vehicles
Compass since model year 2018
Jeep Renegade since model year 2018
Wrangler since model year 2019
Limitations
Video only
Factory rear-view camera
After market front camera
1.3.

Connectors

1.3.1. Connectors - video-interface
The video-interface converts the video signals of connected after-market sources in a factory
monitor compatible picture signal which is inserted in the factory monitor, by using separate
trigger options.
Version 24.09.2019
The interface inserts ONLY video signals into the infotainment.
For inserting Audio signals either the possibly existing factory audio-AUX-input
or a FM-modulator can be used.
In case that 2 AV sources shall be connected, a desired audio switching will
require additional electronic.
Automatically switching-back from inserted video to factory rear-view camera
is only possible while the reverse gear is engaged. To delay the switch-back an
additional electronic part is required.
The front camera will automatically be switched for 10 seconds after
disengaging the reverse gear. A manually front camera switching is possible by
external keypad.
HW CANM(V98)/(V34)
Compatible systems
Uconnect Smarttouch with
8.4inch monitor and all-in-one
head-unit with capacitive
touch
RL4-UCON8-CP