Setting Up Airprint - Epson ET-L6550 Series User Manual

Administrator Information
3. Check the settings, and then click OK.
Setting Universal Print
Set when you print from external devices without using the printer driver.
Some items are not displayed depending on the printing language of your printer.
1. Access Web Config and select the Print tab > Universal Print Settings.
2. Set each item.
3. Check the settings, and then click OK.
Basic
Items
Top Offset(-30.0-30.0mm)
Left Offset(-30.0-30.0mm)
Top Offset in Back(-30.0-30.0mm)
Left Offset in Back(-30.0-30.0mm)
Check Paper Width
Skip Blank Page

Setting Up AirPrint

Set when using AirPrint printing and scanning.
Access Web Config and select the Network tab > AirPrint Setup.
Items
Bonjour Service Name
Bonjour Location
Geolocation
Latitude and Longitude (WGS84)
Top Priority Protocol
Wide-Area Bonjour
>
Settings to Use the Printer
Sets the vertical position of the paper on which printing starts.
Sets the horizontal position of the paper on which printing starts.
Sets the vertical position of the paper on which the printing of the back side of
the paper starts in duplex printing.
Sets the horizontal position of the paper on which the printing of the back side of
the paper starts in duplex printing.
Set whether to check paper width when printing.
If there is a blank page in the print data, set not to print a blank page.
Enter the Bonjour service name between 1 and 41 characters in ASCII (0x20-0x7E).
Enter location information such as the printer's placement within 127 bytes or less
in Unicode (UTF-8).
Enter the printer's location information. This entry is optional.
Enter values by using WGS-84 datum, which separates latitude and longitude with
a comma.
You can enter -90 to +90 for the latitude value, and -180 to +180 for the longitude
value. You can enter less than a decimal to the sixth place, and you can omit "+".
Select top priority protocol from IPP and Port9100.
Set whether or not to use Wide-Area Bonjour. If you use it, the printers must be
registered on the DNS server to be able to search the printer over the segment.
353
>
Setting Up AirPrint
Explanation
Explanation