Setting Up Airprint - Epson WorkForce Pro WF-4830 Series User Manual

Administrator Information
❏ Auto Error Solver
Set whether to automatically cancel the error if there is no operation on the control panel for 5 seconds
after displaying the error.
3. Check the settings, and then click OK.
Setting Universal Print
Set when you print from external devices without using the printer driver.
Some items are not displayed depending on the printing language of your printer.
1. Access Web Config and select the Print tab > Universal Print Settings.
2. Set each item.
3. Check the settings, and then click OK.
Basic
Items
Top Offset(-30.0-30.0mm)
Left Offset(-30.0-30.0mm)
Top Offset in Back(-30.0-30.0mm)
Left Offset in Back(-30.0-30.0mm)
Check Paper Width
Skip Blank Page

Setting Up AirPrint

Set when using AirPrint printing and scanning.
Access Web Config and select the Network tab > AirPrint Setup.
Items
Bonjour Service Name
Bonjour Location
>
Settings to Use the Printer
Sets the vertical position of the paper on which printing starts.
Sets the horizontal position of the paper on which printing starts.
Sets the vertical position of the paper on which the printing of the back side of
the paper starts in duplex printing.
Sets the horizontal position of the paper on which the printing of the back side of
the paper starts in duplex printing.
Set whether to check paper width when printing.
If there is a blank page in the print data, set not to print a blank page.
Enter the Bonjour service name between 1 and 41 characters in ASCII (0x20-0x7E).
Enter location information such as the printer's placement within 127 bytes or less
in Unicode (UTF-8).
316
>
Setting Up AirPrint
Explanation
Explanation