Checking The Network Connection Status; Checking The Network Connection Status From The Control Panel - Epson ET-L6550 Series User Manual

Adding or Replacing the Computer or Devices
Disable Wi-Fi Direct
Disable Wi-Fi Direct (simple AP) settings of the printer. When disabling it, all devices connected to the printer in
Wi-Fi Direct (Simple AP) connection are disconnected.
Restore Default Settings
Restore all Wi-Fi Direct (simple AP) settings to their defaults.
The Wi-Fi Direct (simple AP) connection information of the smart device saved to the printer is deleted.
Note:
You can also set up from the Network tab > Wi-Fi Direct on Web Config for the following settings.
❏ Enabling or disabling Wi-Fi Direct (simple AP)
❏ Changing network name (SSID)
❏ Changing password
❏ Changing the frequency range
Depending on the region, this setting may not be displayed.
❏ Restoring the Wi-Fi Direct (simple AP) settings

Checking the Network Connection Status

You can check the network connection status in the following way.
Related Information
"Checking the Network Connection Status from the Control Panel" on page 279
&
"Printing a Network Connection Report" on page 280
&

Checking the Network Connection Status from the Control Panel

You can check the network connection status using the network icon or the network information on the printer's
control panel.
Checking the Network Connection Status using the Network Icon
You can check the network connection status and strength of the radio wave using the network icon on the
printer's home screen.
>

Checking the Network Connection Status

279
> ...
Chec