Table of Contents
Advertisement
Solving Problems
Related Information
"Loading Paper" on page 31
&
The paper path is smeared.
When vertical banding (horizontal to the printing direction) appears, or the paper is smeared, clean the paper
path.
Related Information
"Cleaning the Paper Path for Ink Smears" on page 151
&
The paper is curled.
Place the paper on a flat surface to check if it is curled. If it is, flatten it.
The printhead is rubbing the surface of the paper.
When copying on thick paper, the print head is close to the printing surface and the paper may be scuffed. In this
case, enable the reduce scuff setting.
Select Settings > General Settings > Printer Settings, and then enable Thick Paper on the control panel. If you
enable this setting, copy quality may decline or may slow down.
Copied Photos are Sticky
The copy was made on the wrong side of the photo paper.
Solutions
Make sure you are copying on the printable side. If you have accidentally copied on the wrong side of the
photo paper, you need to clean the paper path.
"Loading Paper" on page 31
&
"Cleaning the Paper Path for Ink Smears" on page 151
&
The Position, Size, or Margins of the Copies are Incorrect
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
249
Copy Quality is Poor
Advertisement
Table of Contents
