Schwinn Journey 1.0 Service Manual page 31

7. Loosen and remove the Pedals. Set them safely aside for
reassembly.
Note: The Left Pedal is reverse-threaded.
Orientation is based from a seated position on the bike.
The Left Pedal has an "L", the Right Pedal an "R".
8. Remove the Mast Gasket. Set it safely aside for reassembly.
9. Bend the edges of the Top Shroud to disengage the inside tabs
from the Main Assembly, and slide the Top Shroud up the Mast.
10. Remove the hardware (indicated) from the Mast. Gently pull
the Mast out and disconnect the cables. Set the hardware, Mast
and Top Shroud safely aside.
NOTICE: Do not crimp the cables. This step may require two
people.
Note: Do not let the cable fall down inside the Frame.
(R)
31
(L)
X2