Schwinn Journey 1.0 Service Manual page 21

NOTICE: This document provides instructions for the replacement of the Pedals on the Schwinn
Journey 1.0/1.5 Upright Bikes and Journey 2.0/2.5 Recumbent Bikes.
If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and
understand all Warnings on this machine.
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | © 2013 Nautilus, Inc. |
Schwinn is a trademark licensed to Nautilus, Inc., which is registered or otherwise protected by common law in the United States and other countries. |
Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand
all Warnings on this machine.
Disconnect all power to the machine before you service it.
• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings
could cause injury to the service technician or bystanders.
• Keep bystanders and children away from the product being serviced at all times.
• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.
• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps
involving these components. Do not try to do heavy or awkward steps on your own.
• If replacement parts are necessary, use only
ment parts can cause a risk to users, keep the machine from operating correctly and void the warranty.
•
Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing
maintenance or replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If
purchased in US/Canada, contact Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for
them.
• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.
• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct
performance.
Tools Required (not included)
Pedal wrench or 15mm open end
wrench
Replace the Pedals on the Schwinn
TM
Journey 1.0/1.5/2.0/2.5 Bikes
genuine replacement parts and hardware supplied by
™
130/170/230/270 and
™
130/170 Upright Bikes, 230/270 Recumbent Bikes,
ORIGINAL DOCUMENT - ENGLISH VERSION ONLY
21
Replacement Procedure
Nautilus. Failure to use genuine replace-
Skill Level: I
8006488.070119.E