Canon ICAM62B Advanced User's Manual page 562

Table of Contents

Advertisement

Troubleshooting Guide
The image is out of focus or blurred.
Switch to AF focus mode ( = 7, = 54).
z
Press the shutter button gently to prevent camera shake ( = 60).
z
With a lens equipped with an Image Stabilizer, set the IS switch to <1>.
z
In low light, the shutter speed may become slow. Use a faster shutter
z
speed ( = 108), set a higher ISO speed ( = 145), use flash ( = 285),
or use a tripod.
See "Minimizing Blurred Photos" on = 75.
z
I cannot lock the focus and recompose the shot.
Set the AF operation to One-Shot AF. Shooting with the focus locked is
z
not possible with Servo AF ( = 76).
The continuous shooting speed is slow.
The continuous shooting speed for high-speed continuous shooting
z
may be lower, depending on conditions such as these: battery level,
temperature, flicker reduction, shutter speed, aperture, subject
conditions, brightness, AF operation, type of lens, use of flash, and
shooting settings ( = 136).
562

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos m6 mark iiIcam62bkIcam62bk2aIcam62bk2

Table of Contents