Charging The Battery - Canon ICAM62B Advanced User's Manual

Table of Contents

Advertisement

Charging the Battery

42
1
Detach the protective cover
provided with the battery.
2
Fully insert the battery in the
charger.
Do the opposite to remove the battery.
z
3
(1)
Recharge the battery.
For LC-E17
As shown by the arrow, flip out the
z
battery charger's prongs and insert the
prongs into a power outlet.
For LC-E17E
Connect the power cord to the charger
z
(2)
and insert the plug into a power outlet.
Recharging starts automatically and the
z
charge lamp (1) lights up in orange.
When the battery is fully recharged, the
z
full-charge lamp (2) will light up in green.
It takes approx. 2 hr. to fully charge
z
a completely exhausted battery at
room temperature (23°C / 73°F). The
time required to charge the battery will
vary greatly depending on the ambient
temperature and the battery's remaining
capacity.
For safety reasons, charging in low
z
temperatures (5–10°C / 41–50°F) will
take longer (up to approx. 4 hr.).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos m6 mark iiIcam62bkIcam62bk2aIcam62bk2

Table of Contents