Canon ICAM62B Advanced User's Manual page 113

Exposure Compensation with ISO Auto
If the ISO speed is set to [AUTO] for manual exposure shooting, you can
set exposure compensation ( = 142) as follows:
Touch the exposure level indicator
z
[z: Expo.comp./AEB]
z
Quick Control screen
z
If ISO Auto is set, the ISO speed setting will change to obtain the standard
z
exposure with the set shutter speed and aperture. Therefore, you may
not obtain the desired exposure effect. In this case, set the exposure
compensation.
With the camera set to the < a > mode + ISO Auto + [ q ] (Evaluative metering)
z
and [ 8 : C.Fn I-7: AE lock meter. mode after focus] set to the default setting
( = 533), holding down the shutter button halfway will lock the ISO speed after
focus is achieved with One-Shot AF.
When ISO Auto is set, you can press the <A> button to lock the ISO speed.
z
To compare the current exposure to the exposure when you pressed the
z
<A> button initially with a manually set ISO speed, press the <A> button,
recompose the shot, and check the exposure level indicator.
With ISO Auto set and [ 8 : C.Fn I-1: Exposure level increments] set to [1/2-
z
stop], any 1/2-stop exposure compensation will be implemented with the ISO
speed (1/3 stop) and shutter speed. However, the shutter speed displayed will
not change.
Manual Exposure Mode (M)
113