Table of Contents
Advertisement
Anti-flicker Shooting
If you shoot an image with a fast shutter speed under a light source such
as fluorescent light, the blinking of the light source causes flicker and the
image may be vertically unevenly exposed. If continuous shooting is used
under these conditions, uneven exposures or colors across the images may
result. Anti-flicker shooting enables you to take pictures when exposure and
colors are less affected by flickering.
1
Select [z: Anti-flicker shoot.].
2
Select [Enable].
3
Take the picture.
After setting to [Enable], or when the
z
light source changes, detect flicker
before shooting by pressing the <Q>
button, selecting [Anti-flicker shoot.],
then pressing the < B > button.
The picture will be taken with reduced
z
unevenness of exposure or color tone
caused by the flicker.
M
195
Advertisement
Table of Contents
