Canon ICAM62B Advanced User's Manual page 262

Time-lapse Movies
You can use Wireless Remote Control BR-E1 (sold separately) to start and stop
z
the time-lapse movie recording.
With Wireless Remote Control BR-E1
y First, pair the Wireless Remote Control BR-E1 with the camera ( = 448).
y Make sure [z: Remote control] is set to [Enable].
y Take test shots, then when the camera is ready to shoot (as in step 15 on
= 258), set the BR-E1's release timing/movie shooting switch to <o>
(immediate release) or <2> (release after 2-sec. delay).
y If the remote control's switch has been set to <k>, the time-lapse movie
recording cannot start.
Camera status/
remote control setting
Test-shooting screen
Shooting-ready
During time-lapse
movie recording
262
<o> Immediate release
<2> 2-sec. delay
Test-shooting
Starts shooting
Ends recording
<k> Movie recording
To shooting-ready
To test-shooting screen
Ends recording