Table of Contents
Advertisement
Set Image Search Conditions
(2)
Clearing the Search Conditions
Access the screen in step 2, then press the <S> button to remove all the
checkmarks [ X ]. Press < 0 > to clear the search conditions.
If no images match the search conditions, [OK] is not available on the screen
z
in step 2.
Search conditions may be cleared if you perform power, card, or image editing
z
operations.
Auto power off time may be extended while the [ 3 : Set image search
z
conditions] screen is displayed.
366
3
Apply the search conditions.
Press < 0 > and read the message
z
displayed.
Select [OK].
z
The search condition is specified.
z
4
Display the found images.
Press the < 3 > button.
z
Only the images that match the set
z
conditions (filtered) will be played back.
When the images are filtered for display,
z
the screen will have an outer yellow
frame (2).
Advertisement
Table of Contents
