Canon ICAM62B Advanced User's Manual page 184

Focus Bracketing
Focus bracketing is intended for still photo shooting on a tripod.
z
Shooting with a wider angle of view is recommended. After depth compositing,
z
you can crop the image if necessary.
The following lenses can be used (as of April 2019).
z
y EF16-35mm f/4L IS USM
y EF24-70mm f/4L IS USM
y EF100mm f/2.8L MACRO IS USM
y EF180mm f/3.5L MACRO USM
y EF-M28mm f/3.5 MACRO IS STM
y EF-M15-45mm f/3.5-6.3 IS STM
y EF-M18-150mm f/3.5-6.3 IS STM
y EF-S35mm f/2.8 MACRO IS STM
y EF-S60mm f/2.8 MACRO USM
y EF-S18-135mm f/3.5-5.6 IS USM
Set [Exposure smoothing] to [Disable] with the following lenses, because
z
they may cause changes in image brightness.
y EF100mm f/2.8 L MACRO IS USM
y EF180mm f/3.5 L MACRO USM
y EF-S60mm f/2.8 MACRO USM
Suitable [Focus increment] settings vary by subject. An unsuitable [Focus
z
increment] setting may cause unevenness in composite images, or shooting
may take more time because more shots are taken. Take some test shots to
decide a suitable [Focus increment] setting.
Combining images may take some time when the [Number of shots] setting is
z
high.
Flash photography is not possible.
z
Shooting under flickering light may cause uneven images. In this case, lowering
z
the shutter speed may give better results.
Has no effect (focal position does not change) in MF focus mode.
z
Canceling shooting in progress may cause exposure problems in the last
z
image. Avoid using the last image when combining the images in Digital Photo
Professional.
184