Sound Recording
Sound Recording/Sound-Recording Level
Auto
z
The sound-recording level is adjusted automatically. Auto level control
will take effect automatically in response to the sound level.
Manual
z
You can adjust the sound-recording level as needed.
Select [Rec. level] and press the < Y > < Z > keys while looking at the
level meter to adjust the sound-recording level. Look at the peak hold
indicator, and adjust so that the level meter sometimes lights up on the
right of the [12] (–12 dB) mark for the loudest sounds. If it exceeds [0],
the sound will be distorted.
Disable
z
Sound will not be recorded.
Wind Filter
Set to [Auto] to reduce wind noise automatically when there is wind
outdoors. Only activated when the camera's built-in microphone is used.
When the wind filter function takes effect, part of the low bass sounds will
also be reduced.
250
You can record movies while recording
sound with the built-in stereo microphone
or an external stereo microphone. You can
also freely adjust the sound-recording level.
Use [z: Sound recording] to set sound
recording functions.