Household Power Outlet Accessory - Canon ICAM62B Advanced User's Manual

If the access lamp does not light up, try unplugging the USB power adapter and
z
plugging it in again.
The charging time required and the amount charged vary depending on
z
ambient temperature and remaining capacity.
For safety reasons, recharging in low temperatures (0–10°C / 41–50°F) will
z
take longer.
Batteries are not charged when the camera is connected via Wi-Fi or when the
z
card slot/battery compartment cover is open.

Household Power Outlet Accessory

You can power the camera with a household power outlet by using the
DC Coupler DR-E17 and Compact Power Adapter CA-PS700 (each sold
separately). For instructions on attachment and use, refer to the DR-E17
and CA-PS700 instruction manuals.
Do not use an AC adapter other than the Compact Power Adapter CA-PS700.
z
While the camera's power switch is on, do not connect or disconnect the power
z
cord or connector or do not disconnect the DC coupler.
After using the camera, unplug the power plug from the power outlet.
z
Household Power Outlet Accessory
557