Canon ICAM62B Advanced User's Manual page 136

Table of Contents

Advertisement

Drive Mode
[ m / Q ] Self-timer: 10 sec./remote control
z
[ l / k ] Self-timer: 2 sec./remote control
z
[ q ] Self-timer: Continuous shooting
z
Conditions for maximum high-speed continuous shooting speed ( = 135)
z
for [E] or [ o ] are as follows: shooting with a fully charged battery at a
1/1000 sec. or faster shutter speed and maximum aperture (which varies
depending on the lens), at room temperature (23°C / 73°F), with flicker
reduction disabled.
The maximum continuous shooting speed for [E] and [ o ] high-speed
z
continuous shooting may be slower depending on factors such as the battery
level, temperature, flicker reduction, shutter speed, aperture value, subject
conditions, brightness, AF operation, type of lens, use of flash, and shooting
settings.
With Servo AF, the maximum continuous shooting speed may become slower
z
depending on subject conditions or the lens used.
With [z: Anti-flicker shoot.] set to [Enable] ( = 195), shooting under
z
flickering light may decrease the maximum continuous shooting speed. Also,
the continuous shooting interval may become irregular and the release time lag
may become longer.
Even with low-speed continuous shooting, the continuous shooting speed may
z
become slower depending on the shooting conditions.
When internal memory becomes full during continuous shooting, the continuous
z
shooting speed may drop off because shooting will be temporarily disabled
( = 126).
Subject tracking is easier with [E] or [ i ], because real-time images are
z
displayed between shots in continuous shooting.
For self-timer shooting, see = 137. For remote control shooting, see = 225.
z
136

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos m6 mark iiIcam62bkIcam62bk2aIcam62bk2

Table of Contents