Table of Contents
Advertisement
Anti-flicker Shooting
With [Enable] set, the shutter-release time lag is longer when you shoot under
z
a flickering light source. Also, the continuous shooting speed may become
slower, and the shooting interval may become irregular.
This function will not be applied to movie recording.
z
Flicker at a frequency other than 100 Hz or 120 Hz cannot be detected. Also, if
z
the flickering frequency of the light source changes during continuous shooting,
effects of the flicker cannot be reduced.
In the < t >, < d >, or < f > mode, if the shutter speed changes during
z
continuous shooting or if you shoot multiple shots of the same scene at different
shutter speeds, the color tone may become inconsistent. To avoid inconsistent
color tones, use < t >, < a >, or < s > mode at a fixed shutter speed.
Color tone of captured images may vary between [Enable] and [Disable].
z
Shutter speed, aperture, and ISO speed may change when you start shooting
z
(even with AE lock).
If the subject is against a dark background or if there is a bright light in the
z
image, flicker may not be properly detected.
Flicker reduction may not be possible under special lighting.
z
Depending on the light source, flicker may not be detected properly.
z
Depending on the light sources or shooting conditions, the expected result may
z
not be obtained even if you use this function.
Taking test shots in advance is recommended.
z
Flicker is not reduced in Basic Zone modes.
z
Flicker reduction also works with flash photography. However, the expected
z
result may not be obtained for wireless flash photography.
196
Advertisement
Table of Contents
