Canon ICAM62B Advanced User's Manual page 259

Table of Contents

Advertisement

If the card does not have enough free space to record the set number of shots,
z
[Playback time] will be displayed in red. Although the camera can continue
shooting, the shooting will stop when the card becomes full.
If the movie file size exceeds 4 GB with the [No. of shots] settings and the
z
card is not formatted in exFAT ( = 493), [Playback time] will be displayed in
red. If you keep shooting in this condition and the movie file size reaches 4 GB,
the time-lapse movie recording will stop.
Do not point the camera toward an intense light source, such as the sun or an
z
intense artificial light source. Doing so may damage the image sensor or the
camera's internal components.
Time-lapse movies cannot be recorded when the camera is connected to a
z
computer with the interface cable, or when an HDMI cable is connected.
Movie Servo AF will not function.
z
If the shutter speed is 1/30 sec. or slower, the exposure of the movie may not
z
be displayed properly (may differ from that of the resulting movie).
Do not zoom the lens during time-lapse movie recording. Zooming the lens
z
may cause the image to be out of focus, the exposure to change, or the lens
aberration correction not to function properly.
When recording a time-lapse movie under a flickering light, noticeable image
z
flickering, horizontal stripes (noise), or irregular exposures may be recorded.
Images that are displayed while time-lapse movies are being recorded may
z
look different from the resulting movie. (For example, there may be inconsistent
brightness from flickering light sources, or noise from a high ISO speed.)
When recording a time-lapse movie under low light, the image displayed during
z
shooting may look different from what is actually recorded in the movie. In such
cases, the [g] icon will blink.
If you move the camera from left to right (panning) or shoot a moving subject
z
during time-lapse movie recording, the image may look extremely distorted.
During time-lapse movie recording, auto power off will not take effect. Also,
z
you cannot adjust the shooting function and menu function settings, play back
images, etc.
Sound is not recorded for time-lapse movies.
z
With time-lapse movie recording, you can press the shutter button completely
z
to start or stop the movie recording regardless of the [ 5 : Shutter btn function
for movies] setting.
With [Interval] set to less than 3 sec. and [Auto exposure] set to [Each
z
frame], if the brightness differs greatly from the preceding shot, the camera
may not shoot at the set interval.
Time-lapse Movies
259

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos m6 mark iiIcam62bkIcam62bk2aIcam62bk2

Table of Contents