System - urmet domus 1099 User Manual

Schedule: this is used to program when the alarm must be activate (【All Day】, 【User_defined】).
If 【User_defined】 is chosen: holding the left button pressed, drag the mouse to select the programming periods. It is also
possible to:
- click on the name of each day of the week to enable/disable the entire day.
- Enable/disable individual cells by clicking on them.
Press Save to save the changes.
3) OVERLAY SETTING
Click on 【Alarm】→【Overlay Setting】 to access the following interface.
Main Stream: if the boxes are ticked, this enables the display of alarm lines on areas enabled on the main video stream (Main
Stream).
Sub Stream: if the boxes are ticked, it enables the display of video analysis lines on identified persons and/or enabled areas
on the secondary video stream (Sub Stream).
Press Save to save changes.
7.2.4

SYSTEM

The System menu contains the following items: 【Date/Time】,【Users】, 【Info】 and 【Log】. The respective
interfaces and descriptions are shown below.
1) DATE/TIME SETTING
Click on 【System】→【Date/Time】 to access the following interface.
PARAMETERS: the Device Name can be changed here.
DATE/TIME: This user interface can be used to set the date and time, including System Time, NTP, Date Format and
Time Format. After having made the setting, click on Save.
DS1099-164 17