Table of Contents
Advertisement
3)
FTP
Click on【Network】→【FTP】 to access the following interface.
➢
FTP: enables the FTP server.
➢
Server: enter the name of the FTP server.
➢
Port: enter the port of the FTP server.
➢
User name: enter the user name to access the FTP server.
➢
Password: Enter the password for the user name of the FTP server.
➢
Passive mode: Used for clients that are protected by firewalls and do not allow the server to send replies.
➢
Save directory path: Enter the save directory path.
➢
Uploading: You can choose between disable and image.
➢
Status: informs us of the connection status to the FTP server. By pressing the button
connection to the server.
4)
Email
Click on 【Network】) →【Email】 to access the following interface.
Email:
email service setting. By using this function in association with the Motion alarm function, the camera can sent the
images acquired by email on the Internet by contacting the set email server (SMTP).
Email: Disable/Enable.
Encryption: SSL, TLS, STARTTLS.
SMTP Server: Enter the email server address.
Sender Pwd: The sender's email password.
14
SMTP Port: The default value is 25 (email service port).
With enabled SSL Encryption the port is
usually 465.
Authentication: Disable/Enable.
Sender Email: The sender's email address.
Receiver Email: The recipient's email address (three
addresses are possible).
, you can test the
DS1099-164
Advertisement
Table of Contents
