Table of Contents
Advertisement
INTRODUCTION
Dear Customer,
Thank you for purchasing this product. We invite you to read this manual carefully before starting any operation. The software
can be updated at any time. Consequently, the contents of this instruction manual are subject to change without prior notice.
Notes:
➢
IPC standard for Internet Protocol Camera.
➢
Select: left click.
➢
Double click: left click twice.
➢
Default IP address of the IP camera enabled in absence of DHCP: 192.168.1.168.
➢
Default username of the camera IP: admin (lower case); Password: admin (lower case).
➢
Default web port: 80. Default web port: 6066. Command port: 6060.
➢
In order to prevent potential IP address conflicts, it is recommended that on IP camera be connected and configured
in the network at a time.
➢
The content of this manual could be different from your current version. Please contact Urmet Technical Customer
Care if you encounter problems during operations. The manual will be regularly updated without prior notice.
1
PRODUCT TECHNICAL FEATURES
URMET device Ref. 1099/204B is an IP camera which may be controlled entirely by connecting to the TCP/IP network.
1.1
Technical specifications
➢
High-performance CMOS sensor.
➢
Optimised H.264 and H.265 video compression algorithms; multi-stream transmission for high-definition images on
broadband and narrowband media.
➢
Simultaneous connection of up to 5 video streams.
➢
With integrated web server, Internet Explorer can be for real-time monitoring, setting and managing from the website.
➢
Possibility of recording on IP HVR/NVR video recorder (not included).
➢
Remote system updates supported.
➢
LAN and Internet supported.
➢
ONVIF 2.4 protocol supported.
➢
Various network protocols supported, such as TCP/IP, IPv4, RTSP, UDP, SMTP, NTP, DHCP, DNS, FTP.
➢
Alarm function supported on movement detection (the user can set area and sensitivity).
➢
Privacy area function supported.
➢
Snapshot function. Image uploading from email.
➢
Automatic reset function supported. Can be connected automatically in case of network interruption.
Note: the specifications of the various products may be subject to minor changes.
1.2
Opening the package
Check that the packing and the contents are not visibly damaged. Contact the retailer immediately if parts are either missing
or damaged. Do not attempt to use the device in this case. Send the product back in its original packing if it is damaged.
ACCESSORIES PROVIDED
➢
1 IP camera
➢
1 URMET Quick Start Guide on paper
➢
1 OSS Notice on paper
IMPORTANT NOTE:
Accessories may be changed without prior notice.
DS1099-164
3
Advertisement
Table of Contents
