Table of Contents
Advertisement
2)
IMAGE CONTROL
Click on 【Display】→【Image Control】 to access the following interface.
➢
IRCUT Mode: 3 modes: GPIO & Video Mode, Color Mode and Black & White Mode (Not available for this camera
model).
➢
IR-CUT Delay: This is the IRcut delay time (Not available for this camera model).
➢
IR-CUT Reverse: allows the IR filter to be switched on or off (Not available for this camera model).
➢
Image setting: This is used to adjust brightness, contrast, saturation, hue, sharpness.
➢
BLC (Back light compensation): This is used to Enable/Disable backlight compensation. The compensation of back
light can compensate the darkness of the subject caused by the exposure against sunlight. Under some usage
conditions, the field may contain a very bright background, like or door or window in full light, with the subject
surrounded by the field of light. In this case, the picture may appear dark and flat. The compensation for the back
light can be used to resolve this problem.
➢
3D Noise Reduction: enables the reduction of noise on the signal, Auto, Weak, Normal, Strong.
➢
WDR: This enables or disables the WDR function: Weak, Normal, Strong.
WDR allows the camera to acquire highly contrasted images. In short, DR (dynamic range) shows the details of the
light part and the dark part of the image. A wider dynamic range shows richer layers and a larger space of colours.
➢
Flip: 4 modes: Close, Leftright, Updown, Center.
➢
White Balance: Auto, Manual, Incandescent, Warm, Fluorescent, Natural.
Manual: Manual adjustment of the red and blue gain for the camera video.
Auto: Optimisation according to the current lighting conditions and method of the screen and video colour calibration
of the camera video colours.
➢
Iris Type: Manual and automatic modes can be selected. The default mode is Auto.
➢
Time exposure: Camera exposure level adjustment.
➢
Gain: Automatic gain level AGC adjustment (Auto, 6dB, 12dB, 18dB, 24dB, 30dB, 36dB, 42dB).
10
DS1099-164
Advertisement
Table of Contents
