2)
Video Stream
Click on 【Network】→【Video Streaming】 to access the following interface.
➢
Type: MainStream and SubStream.
The user can set: Resolution (Resolution), FPS, Audio, control of the bitrate (Rate control: CBR/VBR and the
MainStream/SubStream/MobileStream Bitrate.
➢
Resolution: MainStream (2304×1296, 1920x1080,1280×720), SubStream (640×360).
➢
FPS: Max. 25 for all streams.
➢
I Frame Interval: is an interval for improving image quality. By default it is set to 60 for the MainStream and 50 for
the SubStream.
➢
Audio: Enable/disable TLC audio input (if supported by the camera model).
➢
Rate Control: Set the Bitrate management as CBR (Constant Bit Rate) or VBR (Variable Bit Rate, at 6 quality levels
from Best to Worst.
➢
Bitrate: set the transmission speed to bits per second as manual (user-defined) or default value.
IMPORTANT NOTE:
It is possible to invoke the fourth stream camera, type MJPEG, viewable from any Internet browser through the URL:
Description
•
IP: Enter the IP address of the device.
IMPORTANT NOTE:
Single JPEG snapshots can be acquired via URL:
Description
•
IP: Enter the IP address of the device.
DS1099-164
http://IP/Streams/1/4/ReceiveData
http://IP/Snapshot/1/RemoteImageCapture?ImageFormat=2
13