Table of Contents
Advertisement
4
EASYTOOL
The software is capable of detecting the IP address of the IP camera in the LAN network. Firstly, download the easytool.zip
file from the Urmet website and unzip it.
Install and run EasyTool.exe.
Start "Easy Tool" by selecting
automatically shown for each IP camera, as shown in the following figure.
If the searched IP and the IP address of the PC are not on the same network segment, the IP address, the subnet mask and
other IP camera parameters can be changed by using Easy Tool.
Firstly, select the device the IP address of which you want to change and enter the new IP address, Subnet Mask and Gateway
values (Subnet Mask and Gateway may be inherited from the PC) and the username/password. Click on Modify IP Address
to change the IP address of the device.
IMPORTANT NOTE
The default IP address of the IP camera is "192.168.1.168", the default username is "admin", the default multimedia port
number is "6066" and the default command port is "6060".
6
: the IP Address, Subnet Mask, Gateway and MAC Address will be
DS1099-164
Advertisement
Table of Contents
