Table of Contents
Advertisement
7.2.3
ALARM
1)
AI SETTING
Click on 【Alarm】→【AI Config.】 to access the following interface.
Setting procedure
1. Enable/disable person detection (Human) and/or motion detection (Motion).
2. While holding down the left button, drag the mouse to select the person and/or motion detection area. It is also possible to
choose polygonal-shaped areas (triangle, pentagon, hexagon, etc.) as shown opposite the image. It is also possible to enable
individual cells by clicking on them.
3. Set the sensitivity of person and/or motion detection
4. Following a Human and/or Motion event, the following actions can be activated:
➢
Send e-mail: send e-mail (with image attached to the e-mail)
➢
Send to FTP: Save image to FTP server (to set FTP server see section【Network】 →【FTP】)
➢
Push Notification: Sending push notification to V-Stream app on smartphone (Attention you need to activate the
notification reception also in the ALARMS menu of V-Stream app)
5. Click on Save to make the setting active.
PROGRAMMING
2)
Click on 【Alarm】→【Schedule】 to access the following interface.
16
DS1099-164
Advertisement
Table of Contents
