Table of Contents
Advertisement
installation-panels, barriers, faceplates
6. Holding the glass barrier in front of the unit, slide it up behind the top lip of the unit. Lift the barrier up as far as it goes, then hook the barrier onto the unit.
Glass Barrier Adjustment
Glass barrier adjustment
Slide behind the top lip
If glass isn't hanging straight, use a phillips screwdriver to adjust the angle.
7. If glass isn't hanging straight, use a phillips screwdriver to adjust the angle.
Clockwise = angles barrier out toward you
Clockwise = angles barrier out toward you
Counter clockwise = angles barrier in towards the unit.
Counter clockwise = angles barrier in towards the unit.
8. Install Side A and Side B barrier glass.
Slide the screwdriver straight up at the two indicator slots.
DETAIL B
SCALE 1 : 4
74
| City Series CP60E
3RD ANGLE
TOLERANCES UNLESS
PROJECTION
DIMENSIONS
0.000 = 0.01 CRITICAL
0.000 = SPECIFIED TOLERANCE
DO NOT SCALE
0.000 = 0.031
DRAWING
0.000 REF = REFERENCE ONLY
UNITS IN INCHES
ANGULAR = 1
Lift up
B
2
3RD ANGLE
TOLERANCES UNLESS
PROJECTION
OTHERWISE STATED
DIMENSIONS
0.000 = 0.01 CRITICAL
0.000 = SPECIFIED TOLERANCE
DO NOT SCALE
0.000 = 0.031
DRAWING
0.000 REF = REFERENCE ONLY
UNITS IN INCHES
ANGULAR = 1
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT.
2
FIREPLACE PRODUCTS
OTHERWISE STATED
INTERNATIONAL
1:24
SCALE:
DWN:
E.C.N.:
SIGN:
Push forward
FIREPLACE PRODUCTS
-
MAT'L :
INTERNATIONAL
PROCESS :
1:24
CP60 MAIN ASSEMBLY
SCALE:
PART :
11/29/2021
DWN:
DATE:
E.C.N.:
SIGN:
DATE:
3
-
MAT'L :
SHEAR/ PUNCH/ FORM
PROCESS :
CP60 MAIN ASSEMBLY
PART :
11/18/2021
PART NO:
REV:
DATE:
457-500
-
DATE:
Lower onto hooks
SHEAR/ PUNCH/ FORM
PART NO:
REV:
457-500
-
Advertisement
Table of Contents
