Table of Contents
Advertisement
installation - general
OPTION 5 - FRONT
Shown with ventilation opening on the front to meet the minimum re-
quirement of 180 sq. in.
DO NOT SCALE
UNITS IN INCHES
Shown with ventilation opening on the front with a chimney chase to meet
3RD ANGLE
PROJECTION
the minimum requirement of 180 sq. in.
The chimney chase must be sealed with a firestop to prevent heat from
DO NOT SCALE
DRAWING
escaping into the chimney chase enclosure. All heat must exit through the
UNITS IN INCHES
ventilation openings.
34
| City Series CP60E
C
Option 5 - Front
3RD ANGLE
TOLERANCES UNLESS
PROJECTION
OTHERWISE STATED
DIMENSIONS
0.000 = 0.01 CRITICAL
0.000 = SPECIFIED TOLERANCE
0.000 = 0.031
DRAWING
0.000 REF = REFERENCE ONLY
ANGULAR = 1
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT.
C
Option 6 - Chimney Chase
TOLERANCES UNLESS
OTHERWISE STATED
DIMENSIONS
0.000 = 0.01 CRITICAL
0.000 = SPECIFIED TOLERANCE
0.000 =
0.031
0.000 REF = REFERENCE ONLY
ANGULAR =
1
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT.
FIREPLACE PRODUCTS
MAT'L :
INTERNATIONAL
PROCESS :
1:96
SCALE:
PART :
11/22/2021
MEDRALIN
DATE:
DWN:
E.C.N.:
DATE:
SIGN:
Chimney Chase
Firestop required
at top of bench
enclosure
FIREPLACE PRODUCTS
MAT'L :
INTERNATIONAL
PROCESS :
1:96
SCALE:
PART :
11/22/2021
MEDRALIN
DWN:
DATE:
E.C.N.:
SIGN:
DATE:
A
10" (254 mm) min.
B
2" (51 mm) min.
C
180 sq. in min.
A = 10" (254 mm) min.
B = 2" (51 mm) min.
D
1-1/2" (38 mm) min.
C = 180 sq in
D = 1-1/2" (38 mm) min.
-
SHEAR/ PUNCH/ FORM
CP60 ENCLOSURE
PART NO:
REV:
CP60 ENCLOSURE
-
A = 10" (254 mm) min.
B = 2" (51 mm) min.
C = 180 sq in min.
A
10" (254 mm) min.
D = 1-1/2" (38 mm) min.
B
2" (51 mm) min.
C
180 sq. in min.
D
1-1/2" (38 mm) min.
-
SHEAR/ PUNCH/ FORM
CP60 ENCLOSURE
PART NO:
REV:
CP60 ENCLOSURE
-
Advertisement
Table of Contents
