Table of Contents
Advertisement
Temperature Indication Display
With the system off, press the THERMOSTAT key and the MODE key at
the same time. Look on the transmitter's LCD screen for a C or F to the
right of the room temperature display (figures 4 & 5).
Figure 4: Remote Control
Display in Fahrenheit.
Turn on the Appliance
With the system off, press the ON/OFF
key on the transmitter. Some icons will
be active on the transmitter display;
nonetheless, the IFC will activate the
appliance. A single "beep" from the IFC
confirms reception of the command.
Turn off the Appliance
With the system ON, press the ON/OFF key on the transmitter. The
transmitter LCD display will only show the room temperature (fig. 6).
At the same time, the IFC will turn off the appliance. A single "beep"
from the IFC confirms reception of the command.
Figure 5: Remote Control
Display in Celsius.
Figure 6: Remote Control
display
owner's information
Remote-Flame Control
The Proflame has six (6) flame levels. With the system on and flame level
at maximum, the DOWN ARROW key will reduce the flame height by one
step each time it is pressed, until the flame is off.
The UP ARROW key will increase the flame height each time it is pressed.
If the UP ARROW key is pressed while the system is on but the flame is
off, the flame will come on in the high position. (fig. 7 & 8) A single "beep"
confirms reception of the command.
Fig. 7
Fig. 8
Room Thermostat (Transmitter Operation)
The remote control can operate as a room thermostat which can be set
to a desired temperature. To activate this function, press the THERMO-
STAT key (fig. 1). The LCD display on the transmitter will show that the
room thermostat is on, and the set temperature is displayed (fig. 9). To
adjust the set temperature, press the UP or DOWN ARROW keys until
the desired temperature is displayed on the transmitter's LCD screen.
Figure 9
Figure 10
City Series CP60E |
13
Advertisement
Table of Contents
