Changing The Processor Speed - Epson Powerspan 2 User Manual

When you are ready to use your computer again, type your
keyboard password and press
Utility Menu.
If you enter an incorrect password, the prompt remains on
the screen. Try entering it again; you can try as many times
as you want.
7. Follow the instructions on the screen to exit the EISA
Configuration utility.

Changing the Processor Speed

Your computer's processor can operate at two speeds: high and
low. High speed is the maximum speed of your microprocessor
and low speed simulates an 8 MHz processor speed to provide
compatibility with certain older application programs. (See
your program manual to see if you need to set your processor
speed to low.)
You set the default processor (or CPU) speed when you ran
either the SETUP program or the EISA Configuration utility
(described in Chapters 2 and 3). If necessary, you can
temporarily change the processor speed using keyboard
commands or the EISA System Utilities.
If you often use programs that require the processor to operate
at low speed (8 MHz), use the SETUP program or EISA
Configuration utility to set the default CPU speed to low. See
Chapters 2 and 3 for instructions. If you use these programs
only occasionally, use the keyboard commands or the EISA
System Utilities program, described below, to change the
processor speed temporarily.
Enter.
You see the Password
Using Your Computer 4-17