Monitor Problems - Epson Powerspan 2 User Manual

Monitor Problems

See the suggestions below if you have trouble with your
monitor.
There is no display on the screen.
Make sure the monitor cables are securely connected to the
monitor, the computer, and the electrical outlet.
Check that the monitor's power switch is on and that the
power light on the monitor is lit. If the power light is on but
you still do not see anything on the screen, check the
monitor's brightness and contrast controls.
Check to see if the electrical outlet supplies power.
You may have redirected your computer's input and
output functions to one of the serial ports. If you need to
disable this option, set jumper B0292 on the main system
board to return to the computer's configuration options to
their default settings. See Chapter 6 for instructions.
The monitor does not display images correctly.
Make sure your monitor and display adapter match. If you
are using a display adapter card, be sure any switches or
jumpers on the card and on the computer's main system
board are set properly. See Chapter 6 and the manual that
came with the card for instructions.
Be sure you chose the correct display adapter type in the
SETUP program or the EISA Configuration utility. See
Chapters 2 and 3.
If you are running an application program, see if you need
to configure it for the type of monitor and display adapter
you have. Also, make sure you are using the correct
monitor and display adapter for your software.
A-22 Troubleshooting