Table of Contents
Advertisement
2.
Open the cover by pulling it toward you until the curved
tabs disengage from the computer's back panel.
3.
Lift the cover out of the computer and set it aside.
Replacing the System Covers
Before replacing the internal main system board cover, make
sure you left no tools or loose parts inside the computer case.
Also make sure that all spare or loose power and device cables
are securely tucked into the space beneath the upper hard disk
drive bays or above the lower SCSI drive bays.
Replacing the Internal Main System Board Cover
Follow these steps to replace the main system board cover:
1.
Position the cover so the edge containing the three curved
tabs points to the left and the edge with the curved rail is at
the top.
2.
Holding the cover at an approximately 45° angle to the
computer, insert the three curved tabs into the three slots in
the computer's back panel.
Accessing In tern al Components
5-5
Advertisement
Table of Contents
