Changing The Processor Speed; Changing Or Deleting A Password - Epson Endeavor L User Manual

2. When you want to disable the keyboard and mouse, enter
your hot key combination. The keyboard and mouse lock
up and do not respond to typed entries or mouse
movement.
To resume activity, type your password and press Enter.
3.

Changing or Deleting a Password

To change or delete your password, you must run the SETUP
program and follow the instructions in Chapter 2 for entering a
password. If you do not know your password, see "Password
Problems" in Chapter 6.

Changing the Processor Speed

Your computer's processor can operate at two speeds: fast
or slow. Fast speed is the highest speed of your processor. Slow
speed simulates an 8 MHz processor to provide compatibility
with older application programs.
When your computer is operating at fast speed, the speed light
on the front panel is green. When the computer is operating at
slow speed, the light is amber.
You should use fast speed for almost everything you do
because your programs will work faster. However, certain
application programs have specific timing requirements and
can run only at the slower speed. See your software manual to
determine if this is the case.
If you want your computer to always start at slow speed, you
can change the default setting through SETUP. See Chapter 2
for instructions.
3-8 Using Your Computer