Performing The Configuration Steps - Epson Powerspan 2 User Manual

Follow these steps to set the date and time:
1. At the Main Menu, select Set date. You see a prompt such
as the following:
Date
2. The current setting for
necessary. You can use the arrow keys to move the cursor
and overtype the date. Then press
3. At the Main Menu, select Set time. You see a prompt
similar to the date prompt.
4. You can use the arrow keys to move the cursor and overtype
the time. Then press
Now you can configure your computer, as described below.

Performing the Configuration Steps

Follow these steps to configure your computer:
1. At the Main Menu, select Configure computer. After a
moment, you see this menu:
S t e p s i n c o n f i g u r i n g y o u r c o m p u t e r
S t e p 1 : I m p o r t a n t E I S A
S t e p 2 : Add or remove boards
S t e p 3 : V i e w o r e d i t d e t a i l s
S t e p 4 : Examine required switches
S t e p 5 : S a v e a n d e x i t
12-12-1994 (mm-dd-yyyy)
Date
Enter.
c o n f i g u r a t i o n i n f o r m a t i o n
Running the EISA Configuration Utility
is highlighted. Correct it as
Enter.
You see the Main Menu.
3-9