Configuring Your System; Starting The Program - Epson Powerspan 2 User Manual

Configuring Your System

Follow the instructions in this section and on your screen to
configure your computer using the EISA Configuration utility
Configure your system in the following order:
Set the date and time
When you add an option card, select the
boards option to copy the necessary configuration files
U s e t h e v i e w o r e d i t t h e d e t a i l s o f y o u r
configuration option to define your configuration
View or print your jumper and switch settings
Save the configuration as you exit the program.

Starting the Program

Follow these steps to start the EISA Configuration utility:
1. Insert the System Configuration diskette in drive A and turn
on or reset the computer.
2. After a moment, you see the title screen for the EISA
Configuration utility. Press
Welcome screen.
Note
If you installed any EISA option cards in your system,
you see a message telling you to configure your
computer. Press
Enter
Enter
to continue.
Running the EISA Configuration Utility
Add or
to continue. You see the
remove
3 - 7