Memory Modules - Epson Powerspan 2 User Manual

3. Attach the other end of the graphics card cable to the VGA
feature connector
on page 6-2.
Note
You do not need to change any jumpers to disable the
built-in VGA adapter if you connect your graphics adapter
card to the feature connector.

Memory Modules

Your computer comes with 8MB of memory installed on two
4MB memory modules on the main system board. By installing
additional memory modules, called SIMMs (single inline
memory modules), you can increase your computer's memory
to 128MB.
There are four SIMM sockets organized in two banks on the
main system board. You can install SIMMs with a capacity of
1MB, 2MB, 4MB, 8MB, 16MB, or 32MB. Check the following
guidelines to ensure that you choose the correct type of SIMMs
and install them properly:
double-sided SIMMs that operate at an access speed of
70 or 80 nanoseconds (ns). You can install 1MB, 2MB, 4MB,
or 8MB 80ns SIMMs and 16MB or 32MB 70ns SIMMs.
Caution
Be sure you install only tin-plated SIMMs in your
system. Gold-plated SIMMs will corrode when installed
in your tin-plated SIMM sockets and damage both the
socket and the SIMM.
(J0410)
on the main system board, shown
Installing and Removing Options 6-11