Table of Contents
Advertisement
If the power cord supplied with your system is not compatible
with the AC wall outlet in your region, obtain a suitable power
cord that meets the following criteria:
The power cord must be rated for at least 125% of the
current rating of the AC voltage system. For more
information, see Appendix B.
The power cord connector that plugs into the wall outlet
must be an appropriately grounded male plug.
The power cord connector that plugs into your system
must be an IEC type CEE-22 female connector.
The power cord must be a flexible <HAR> (harmonized)
cord that is less than 14.76 feet (4.5 meters) long to comply
with the system's safety requirements.
Caution
Do not use or attempt to modify the supplied AC power
cord if it is not the type required for use in your region.
Installation Overview
The following steps offer an overview of the system installation
process and tell you where to look for detailed instructions.
1.
Set the voltage selector switch on the back of the computer
to the correct input line voltage. (See page 1-4.)
Caution
To avoid permanent damage to the computer, be sure
the voltage selector switch is set to the correct input line
voltage before you turn on thepower.
1-2
Setting Up Your System
Advertisement
Table of Contents
