Editing Programs - Duerkopp Adler 869-M PREMIUM Operating Instructions Manual

Programming
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
Symbol Description
PointPos.°
Setting identical to Manual mode,  p. 68.
Speed Corr
Setting identical to Manual mode,  p. 79.
Mat.Thickness
If present, setting identical to Manual mode,
 p. 83.
5. Exit the submenu using the ESC or
 The changed values are stored immediately.
6. If necessary, create further seam sections or exit Programming
mode using the ESC button.
 The program is saved. The machine switches to Automatic
mode and the newly created program is selected.
5.6.6

Editing programs

Parameters of already created programs can be adjusted
subsequently.
To edit a program:
1. Select the desired program.
2. Press the P button.
 The control switches to Edit mode.
The following information is shown, and the P in the program
number field flashes:
Fig. 48: Display in editing mode
◄
button.
1 4.5 25
-
5 2.0
+
+
103