Duerkopp Adler 869-M PREMIUM Operating Instructions Manual page 89

Programming
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
Setting: Needle thread tension (Thr.Tens.)
Depending on the material thickness, the needle thread tension
can be adjusted at different material thicknesses by the software.
linear Thr.Tens.
Value range 00 – 99
ThickMin
Value range 00.0 – 10.0 [mm]
ThickMax
Value range 00.0 – 10.0 [mm]
2.OnOff ThickMin
Value range 00.0 – 10.0 [mm]
2.On ThickMin
Value range 00.0 – 10.0 [mm]
Setting: Sewing foot pressure (Foot Press.)
The sewing foot pressure can be adjusted at different material
thicknesses by the software.
linear Foot Press.
Value range 00 – 20
ThickMin
Value range 00.0 – 10.0 [mm]
ThickMax
Value range 00.0 – 10.0 [mm]
Maximum needle thread
tension reached at the upper
material thickness limit.
Material thickness at which
the increase in needle thread
tension should start.
Material thickness up to
which the increase in needle
thread tension should occur.
Material thickness from
nd
which the 2 needle thread
tension should be used.
Material thickness from
nd
which the 2 needle thread
tension should be used.
Maximum sewing foot
pressure reached at the
upper material thickness
limit.
Material thickness at which
the increase in sewing foot
pressure should start.
Material thickness up to
which the increase in sewing
foot pressure should occur.
87