Table of Contents
Advertisement
30
For machines with thread cutter
20. Pull the thread through the needle eye until the loose thread
end has a length of approx. 4 cm with the thread lever (16) at
the highest position.
Important:
Check the thread length.
If the loose thread end is too long, the thread may be caught by
the hook and cause a disturbance. If the loose thread end is too
short, the machine cannot start sewing.
4.5.2
In 2-needle machines
Fig. 10: Threading the needle thread (2-needle machine) (1)
①
②
(1) - Left hose guide
(2) - Right hose guide
To thread the right and the left needle thread:
Threading the needle thread through the hose guides:
1.
Fit the thread reels on the reel stands.
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
(3) - Unwinding bracket
Operation
③
Advertisement
Table of Contents
