Editing Programs - Duerkopp Adler 868-M PREMIUM Operating Instructions Manual

102
Symbol Description
PointPos.°
Setting identical to Manual mode,  p. 67.
Speed Corr
Setting identical to Manual mode,  p. 76.
FabricThickness
If present, setting identical to Manual mode,  p. 81.
5. Exit the submenu using the ESC or
 The changed values are stored immediately.
6. If necessary, create further seam sections or exit Program-
ming mode using the ESC button.
 The program is saved. The machine switches to Automatic
mode and the newly created program is selected.
5.6.6

Editing programs

Parameters of already created programs can be adjusted subse-
quently.
To edit a program:
1. Select the desired program.
2. Press the P button.
 The control switches to Edit mode.
The following information is shown, and the P in the program
number field flashes:
Fig. 50: Display in editing mode
Operating Instructions 868-M PREMIUM - 01.0 - 05/2017
◄
button.
1 4.5 25
-
Programming
5 2.0
+
+